Interior WPC Wood Fire Door

Our company’s logo "integrity, professional, efficient". We become a successful model of door with high quality and low price.

Send Inquiry

Description

We supply Interior WPC Wood Fire Door.

Our company’s logo "integrity, professional, efficient". We become a successful model of door with high quality and low price. Products are widely used in project building, apartments, residential areas, school, hospital, school and so on. The factory focuses on the production of fire doors for more than 10 years, exported to all over the world, We gained customer’s trust and good reputation. Warmly welcome you from all over the world to visit our factory.

Production requirements of wooden fire doors:

4) when the conditions are available, it is appropriate to assemble the door fan and frame in a complete set, install all the hardware, and then install it in a complete set. In general, the door frame should be installed first, and then the door fan.

5) After the wooden fire door is made, it should be immediately brushed over the bottom oil (dry oil) to prevent damp deformation.

6) The installation of door hardware shall comply with the following provisions:

(1) The hardware should be fully installed, appropriately positioned and fixed reliably.

(2) hinge from the upper and lower end of the door should be 1/10 of the vertical height, and avoid the upper and lower head, after installation should be flexible switch.

(3) All hardware should be fixed with wood screws instead of nails. Should first hammer into 1/3 depth, and then screw in, do not drive all depth. When using hardwood, drill a hole 2/3 of the depth with an aperture 0.9 times the diameter of the wood screw.

(4) it is not suitable to install the door lock at the joint of the middle head and upright.

(5) The door handle should be located below the center of the door height, and the door handle should be 0.9 ~ 1.05m away from the ground.

Product Details: